News

How should the direct optical optical cable be laid?

     The optical fiber cable has a variety of laying environments. The optical fiber cable must be properly protected in any environment. The optical fiber cable manufacturer introduces the laying of the optical fiber cable.

     If the optical fiber cable is likely to be damaged by chemical action, mechanical damage, vibration, heat, underground current, humic substances and pests, it is necessary to take precautions in advance. The surface of the optical fiber cable should not be less than 0.7m from the ground. It should not be less than 1m when passing through the farmland. It can be buried shallowly when it is introduced into the building, crosses the underground building, and bypasses the underground building, but protective measures should be taken. In theory, the optical fiber cable should be buried below the frozen soil layer. When conditions are met, measures should be taken to prevent damage to the optical fiber cable.

     Between the optical fiber cable or between the optical fiber cable or the optical fiber cable of the different use department, if the optical fiber cable is piped or separated by a partition, the parallel clearance can be reduced to 0.1 m; Between the cables, between the control optical fiber cables and between them, the optical fiber cables of different usage departments are within 1 m before and after the intersection. When the optical fiber cables are introduced into the crown or separated by a partition, the intersection The clearance can be reduced to 0.25m.